- All at the push of a button – set the pressure, fill the bead seater, inflate and seat the tyre.
- Includes 6-tube HD inflation cage, inflation-seating system, tyre roller & centring plate.
- The 6-tube HD tyre inflation cage (MIC-6HD) protects from tyres inflating up to 9 bar.
- The Roller Kit will help you effortlessly rotate your tyre for an easy access to the tyre valve.
- Adjustable barrel allows to aim perfectly between the rim and the tyre for an effective seating.
The all-in-one HD Inflation pit stop is the efficient, safe, and ergonomic inflation equipment for your daily truck tyre changing. With its unique design you will no longer have to drop your tyre on the ground or lift it, the tyre stays on its tread during the entire inflation and seating process. Provide good protection to your employees when inflating truck & bus tyres. Use MARTINS INDUSTRIES safety tyre inflation cages that are compliant with CE and DGUV – BGR 157 requirements. Imagine no more back pain or injuries due to heavy tyre lifting, constant seating kickbacks and handling. The wheel centring plate and roller kit will maintain your tyre in a straight position while providing easy access to the valve. Its easy-to-operate control panel will allow you to set the tyre pressure, fill your bead seater, perfectly seat your tyre and precisely inflate to the right pressure. The Inflation Pit Stop will become your technicians preferred truck tyre equipment.
|Meets OSHA Standard 29 CFR 1910.177||Yes|
|Product dimensions - LxWxH (cm)||135 x 96 x 146|
|Tire type||Truck & bus tires|
|Overall tire diameter - max. (cm)||120|
|Tire width - max. (cm)||40.6|
|Net weight (kg)||166|
|Hose length (cm)||132|
|Autocalibration||Yes, on every unit start|
|Reading accuracy (psi)||0.29|
|Air compressor required||Yes|
|Finish||Powder coated paint UV resistant - Never loses is lustre|
|Package dimensions - LxWxH (cm)||140 x 76 x 147|
Can I inflate my tyre with the door open?
No, the inflation process will start only once the door is closed.
Do I need to anchor my inflation cage to the floor?
Safety standards vary by region. Verify with your local health and safety organisation.
My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
Yes, see our spare parts section.
Do I need an air compressor with my station?
Yes, the product does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Can my tank explode by over filling with compressed air?
No, the tank is equipped with a safety valve that will release the excess pressure.
How much time does the battery lasts?
It will last about 500 inflation or deflation cycles.
Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)