- Inflate or deflate your tyres automatically up to 10 bar / 145 psi.
- Wall-mounted unit with 7.6 m air hose to easily reach all tyres on the vehicle.
- Only 2 min. 20 sec. to inflate a 11R22.5 tyre from 0 to 6.89 bar.
- Loud audible signal warns you that the tyre has reached the desired pressure.
- 4 measurement units (psi, bar, kPa, kg/cm2), Overpressure system, LCD screen & backlight.
The Flatematic Single is a single outlet automatic tyre inflator that will automatically start inflation or deflation once it is connected to the tyre valve to precisely reach the selected pressure. Its clip-on chuck makes tyre inflation more productive by allowing you to work away from the tyre.
*Air compressor requiredImportant: compressed air contains water and oil, use proper air filter between the source and device. Failure to do so will void the warranty.
|Features||Fixed, Wall-mounted, Over pressure setting (OPS), Nitrogen compatible (n2)|
|Colour||Black and blue|
|Air compressor required||Yes|
|Air pressure - max. outlet (psi)||145|
|Air pressure - max. inlet (psi)||150|
|Reading accuracy (psi)||0.29|
|Airflow - max. (l/min)||2600|
|Airflow - max. (CFM)||92|
|Hose length (cm)||760|
|Autocalibration||Yes, on every unit start|
|Maintenance & calibration service||Yes|
|Degree of protection||IP66|
|Product dimensions - LxWxH (cm)||20 x 27 x 9|
|Net weight (kg)||6|
|Package dimensions - LxWxH (cm)||31 x 31 x 23|
|Gross weight (kg)||7|
Can the inflator be installed outside?
No, the inflator is not intended for prolonged outdoor use. Its Ingress Protection (IP) rating is 66.
Do I need an air compressor with my inflator?
Yes, the inflator does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Do I need to recalibrate my inflator?
No, the inflator has an automatic calibration feature. It recalibrates itself every time it starts.
Can I use another type of chuck on my inflator?
Yes, other chuck types can be used. However, the chuck type installed on the inflator must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)
What maintenance service do you offer?
MARTINS offers Maintenance and calibration service (MW-MC) in addition to its 1 year warranty.