- Complete inflation equipment to inflate your tyre safely, efficiently, and effortlessly.
- The 6-tube HD tyre inflation cage (MIC-6HD) protects from tyres inflating up to 9 bar.
- At the push of a button, the Flatematic Single (MW-60) will automatically inflate your tyre.
- Install your automatic tyre inflator directly on the inflation cage with the Stand for automatic tyre inflator (MW-STAND).
- The Roller Kit (MIC-ROLLER) will help you effortlessly rotate your tyre for an easy access to the tyre valve.
The HD tyre inflation safety cage complete kit is the perfect combination of the tyre inflation equipment to have in your truck tyre shop. Inflating your truck or bus tyres of up to 1.19 m OD will be easy and accurate. The automatic tire inflator can display the pressure in 4 different measurement units (psi, bar, kPa, kg/cm2) and is equipped with over pressure system, LCD screen & backlight to help you precisely inflate your tyre. Once inflated to the right pressure the loud audible signal will warn you that the tyre has reached the desired pressure. The 6-tube HD tyre inflation cage complete kit exceeds CE standards. With superior manufacturing materials and finish, MARTINS’ tyre inflation cages and inflation tools are the best and safest choices on the market.
Before using the product, please read the instructions carefully.
|Meets OSHA Standard 29 CFR 1910.177||Yes|
|Product dimensions - LxWxH (cm)||135 x 76 x 146|
|Tire type||Truck & bus tires|
|Overall tire diameter - max. (cm)||119|
|Tire width - max. (cm)||52|
|Net weight (kg)||141|
|Hose length (cm)||760|
|Autocalibration||Yes, on every unit start|
|Reading accuracy (psi)||0.29|
|Reading accuracy (bar)||0.02|
|Air compressor required||Yes|
|Finish||Powder coated paint UV resistant - Never lost is lustre|
Can I inflate my tyre with the door open?
No, the inflation process will start only once the door is closed.
Do I need to anchor my inflation cage to the floor?
Safety standards vary by region. Verify with your local health and safety organisation.
My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
Yes, see our spare parts section.
Do I need an air compressor with my station?
Yes, the product does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)