Inflation pit stop - all-in-one tyre inflation cage

Product number: MIC-4-IPS

Features and benefits

  • All at the push of a button – set the pressure, fill the bead seater, inflate and seat the tyre.
  • Includes 4-tube inflation cage, inflation-seating system, tire roller & centring plate.
  • The 4-tube tyre inflation cage (MIC-4) will protect you from tyre inflating up to 9 bar.
  • Inflate tyres measuring up to 119 cm OD by 48 cm large.
  • Adjustable barrel allows to aim perfectly between the rim and the tyre for an effective seating.

The Inflation pit stop - all-in-one tyre inflation cage is the efficient, safe, and ergonomic inflation equipment for your daily truck tyre changing. With its unique design you will no longer have to drop your tyre on the ground or lift it, the tyre stays on its tread during the entire inflation and seating process. Imagine no more back pain or injuries due to heavy tyre lifting, constant seating kickbacks and handling. The wheel centring plate and roller kit will maintain your tyre in a straight position while providing easy access to the valve. Its easy-to-operate control panel will allow you to set the tyre pressure, fill your bead seater, perfectly seat your tyre and precisely inflate to the right pressure. The Inflation Pit Stop will become your technicians preferred truck tyre equipment.


*Patent pending

Specifications

Specifications
Included
  • tyre inflation cage (MIC-4)
  • Seating and inflating station (MSITTS)
  • 2 m air hose with chuck
  • Tyre Roller
  • Wheel centring plate
  • Rechargeable lithium-ion battery with charger
Meets OSHA Standard 29 CFR 1910.177 Yes
Product dimensions - LxWxH (cm) 86 x 97 x 146
Tire type Truck & bus tires
Tire capacity 1
Overall tire diameter - max. (cm) 120
Tire width - max. (cm) 48
Certifications CE
Net weight (kg) 100
Hose quantity 1
Chuck type Open
Hose length (cm) 200
Autocalibration Yes, on every unit start
Reading accuracy (psi) 0.29
Reading accuracy (bar) 0.02
Air compressor required Yes
Warranty 1 year
Materials Steel
Finish Powder coated paint UV resistant - Never lost is lustre
Colour Orange

Documents

FAQ

  • Do I need to anchor my inflation cage to the floor?
    Verify with your local health and safety organisation.

  • My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
    Yes, see our spare parts section.

  • Do I need an air compressor with my station?
    Yes, the product does not produce compressed air.

  • What kind of air compressor should I use with this product?
    The compressor should
    have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
    be equipped with an air filter to protect against water and oil contained in compressed air.
    meet the minimum and maximum air inlet pressure of the inflator.

  • Can my tank explode by over filling with compressed air?
    No, the tank is equipped with a safety valve that will release the excess pressure.

  • How much time does the battery lasts?
    It will last about 500 inflation or deflation cycles.

  • Can I use another type of chuck?
    Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)

Reviews

Write Your Review
Only registered users can write reviews. Please Sign in or create an account