Automatic HD tyre inflation cage 132 cm High Pressure
Available on 23-12-2024
- Secure payment
Features and benefits
- Inflate or deflate automatically while keeping your tyre locked in.
- Safety system on both doors to activate & deactivate the inflation/deflation of tyres.
- Equipped with steel wire mesh walls to protect against large fragments from tyre explosions.
- For tyres of up to 129 cm OD X 48 cm wide.
Tough enough for tyre pressures of up to 13.5 bar with its built-in high-pressure automatic tyre inflator.
The Automatic HD safety tyre inflation cage 132 cm offers better protection for your employees when inflating truck, bus, excavation or aircraft tyres. Equipped with locks and safety valve systems on each door, the Automatic HD safety tyre inflation cage series provide good protection to your employees when inflating truck & bus tyres. Use MARTINS INDUSTRIES safety tyre inflation cages that are compliant with CE and DGUV – BGR 157 requirements. In addition to its sturdiness and safeness, the Automatic HD safety tyre inflation cage 132 cm offers ease, accuracy and versatility with a high-pressure automatic tyre inflator which is nitrogen compatible.
*Air compressor required
Specifications
Specifications | |
---|---|
Included |
|
Meets OSHA Standard 29 CFR 1910.177 | Yes |
Product dimensions - LxWxH (cm) | 151 x 71 x 142 |
Tire type | Truck & bus tires |
Tire capacity | 1 |
Overall tire diameter - max. (cm) | 128.7 |
Tire width - max. (cm) | 48.3 |
Certifications | CE |
Net weight (kg) | 246 |
Hose quantity | 1 |
Chuck type | Open |
Hose length (cm) | 760 |
Autocalibration | Yes, on every unit start |
Reading accuracy (bar) | 0.02 |
Air compressor required | Yes |
Warranty | 1 year warranty |
Materials | Steel |
Finish | Powder coated paint |
Colour | Orange |
Package dimensions - LxWxH (cm) | 170 x 81 x 145 |
Documents
FAQ
-
Can I inflate my tyre with the door open?
No, the inflation process will start only once the door is closed. Do I need to anchor my inflation cage to the floor?
Safety standards vary by region. Verify with your local health and safety organisation.My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
Yes, see our spare parts section.Do I need an air compressor with my station?
Yes, the product does not produce compressed air.What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)Can I order the inflation cage with another inflator model or can I change it?
No, our cages are designed and approved with specific inflators. Any modification would void the certification and warranty.