- Inflate or deflate your tires automatically up to 145 psi.
- Wall-mounted unit with 25’ air hose to easily reach all tires on the vehicle.
- Only 2 min. 20 sec. to inflate a 11R22.5 tire from 0 to 100 psi.
- Loud audible signal warns you that the tire has reached the desired pressure.
- 4 measurement units (psi, bar, kPa, kg/cm2), overpressure system (OPS), LCD screen & backlight.
|Features||Fixed, Wall-mounted, Over pressure setting (OPS), Nitrogen compatible (n2)|
|Color||Black and blue|
|Air compressor required||Yes|
|Air pressure - max. outlet (psi)||145|
|Air pressure - max. inlet (psi)||150|
|Reading accuracy (psi)||0.29|
|Airflow - max. (l/min)||2600|
|Airflow - max. (CFM)||92|
|Hose length (inches)||300|
|Autocalibration||Yes, on every unit start|
|Maintenance & calibration service||Yes|
|Degree of protection||IP66|
|Product dimensions - LxWxH (inches)||9 x 10 1/2 x 3 1/2|
|Net weight (lb)||14|
|Package dimensions - LxWxH (inches)||12 x 12 x 9|
|Gross weight (lb)||15|
Can the inflator be installed outside?
No, the inflator is not intended for prolonged outdoor use. Its Ingress Protection (IP) rating is 66.
Do I need an air compressor with my inflator?
Yes, the inflator does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Do I need to recalibrate my inflator?
No, the inflator has an automatic calibration feature. It recalibrates itself every time it starts.
Can I use another type of chuck on my inflator?
Yes, other chuck types can be used. However, the chuck type installed on the inflator must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)
What maintenance service do you offer?
MARTINS offers Maintenance and calibration service (MW-MC) in addition to its 1 year warranty. See details on our maintenance service: https://martinsindustries.com/ca_en/maintenance-calibration-of-flatematic-family