- All at the push of a button – set the pressure, fill the bead seater, inflate and seat the tire.
- Includes inflation-seating system, tire roller & wheel centering plate.
- Automatically inflate your truck and bus tires up to 130 psi.
- Adjustable barrel allows to aim perfectly between the rim and the tire for an effective seating.
- Compatible with MARTINS 4-bar (MIC-4) and 6-bar HD (MIC-6HD) tire inflation cages.
The Seating and inflating truck tire station is the all-in-one efficient, safe, and ergonomic inflation equipment for your daily truck tire changing. With its unique design you will no longer have to drop your tire on the ground or lift it, the tire stays on its tread during the entire inflation and seating process. Imagine no more back pain or injuries due to heavy tire lifting, constant seating kickbacks and handling. The wheel centering plate and roller kit will maintain your tire in a straight position while providing easy access to the valve. Its easy-to-operate control panel will allow you to set the tire pressure, fill your bead seater, perfectly seat your tire and precisely inflate to the right pressure. The Seating and inflating truck tire station will become your technicians preferred truck tire equipment.
|Meets OSHA Standard 29 CFR 1910.177||No|
|Product dimensions - LxWxH (inches)||34 x 14 x 16 1/2|
|Product dimensions - LxWxH (cm)||86 x 36 x 42|
|Tire type||Truck & bus tires|
|Net weight (kg)||34|
|Net weight (lb)||75|
|Hose length (inches)||79|
|Hose length (cm)||200|
|Autocalibration||Yes, on every unit start|
|Reading accuracy (psi)||0.29|
|Air compressor required||Yes|
|Gross weight (kg)||36|
|Gross weight (lb)||79|
|Package dimensions - LxWxH (cm)||91 x 48 x 40.5|
|Package dimensions - LxWxH (inches)||36 x 19 x 16|
Do I need an air compressor with my station?
Yes, the product does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Can my tank explode by over filling with compressed air?
No, the tank is equipped with a safety valve that will release the excess pressure.
How much time does the battery lasts?
It will last about 500 inflation or deflation cycles.
Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)