Tire Inflation Cage - all-in-one Inflation pit stop 4 bars
10 in stock
- Secure payment
Features and benefits
- All at the push of a button – set the pressure, fill the bead seater, inflate and seat the tire.
- Includes 4-bar inflation cage, inflation-seating system, tire roller & centering plate.
- The 4-bar tire inflation cage (MIC-4) will protect you from tires inflating up to 130 psi.
- Inflate tire measuring up to 47" OD.
- Adjustable barrel allows to aim perfectly between the rim and the tire for an effective seating.
The Inflation pit stop 4 bars - all-in-one tire inflation cage is a complete kit that perfectly combines efficiency, safety, and ergonomics for your daily truck tire maintenance. With its unique design you will no longer have to drop your tire on the ground or lift it, the tire stays on its tread during the entire inflation and seating process. Imagine no more back pain or injuries due to heavy tire lifting, constant seating kickbacks and handling. The wheel centering plate and roller kit will maintain your tire in a straight position while providing easy access to the valve. Its easy-to-operate control panel will allow you to set the tire pressure, fill your bead seater, perfectly seat your tire and precisely inflate to the right pressure. The Inflation Pit Stop will become your technicians preferred truck tire equipment.
*Patent pending
Specifications
Specifications | |
---|---|
Included |
|
Meets OSHA Standard 29 CFR 1910.177 | Yes |
Product dimensions - LxWxH (inches) | 32 x 26 x 59 |
Product dimensions - LxWxH (cm) | 81 x 66 x 150 |
Tire type | Truck & bus tires |
Tire capacity | 1 |
Overall tire diameter - max. (inches) | 47 |
Overall tire diameter - max. (cm) | 120 |
Wheel width - max. (inches) | 16 |
Tire width - max. (cm) | 41 |
Certifications | CE |
Net weight (kg) | 100 |
Net weight (lb) | 220 |
Hose quantity | 1 |
Chuck type | Open |
Hose length (inches) | 79 |
Hose length (cm) | 200 |
Autocalibration | Yes, on every unit start |
Reading accuracy (psi) | 0.29 |
Air compressor required | Yes |
Warranty | 1 year warranty |
Materials | Steel |
Finish | Powder coated paint |
Color | Orange |
Package dimensions - LxWxH (cm) | 81 x 66 x 150 |
Package dimensions - LxWxH (inches) | 32 x 26 x 59 |
Documents
FAQ
-
Do I need to anchor my inflation cage to the floor?
Verify with your local health and safety organization. My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
Yes, see our spare parts section.Do I need an air compressor with my station?
Yes, the product does not produce compressed air.What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.Can my tank explode by over filling with compressed air?
No, the tank is equipped with a safety valve that will release the excess pressure.How much time does the battery lasts?
It will last about 500 inflation or deflation cycles.Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)