- Complete inflation equipment to inflate your tire safely, efficiently, and effortlessly.
- The 4-bar tire inflation cage (MIC-4) will protect you from tires inflating up to 130 psi.
- At the push of a button, the Flatematic Single (MW-60) will automatically inflate your tire.
- Install your automatic tire inflator directly on the inflation cage with the Stand for automatic tire inflator (MW-STAND).
- The Roller Kit (MIC-ROLLER) will help you effortlessly rotate your tire for an easy access to the tire valve.
The 4-bar tire inflation cage complete kit is the perfect combination of all tire inflation equipment to have in your truck tire shop. Inflating your truck or bus tires of up to 47" OD will be easy and accurate. The automatic tire inflator is equipped with 4 measurement units (psi, bar, kPa, kg/cm2), over pressure system, LCD screen & backlight to help you precisely inflate your tire. Once inflated to the right pressure the loud audible signal will warn you that the tire has reached the desired pressure. The 4-bar tire inflation cage complete kit exceeds OSHA standard 29 CFR 1910.177 in the U.S. With superior manufacturing materials and finish, MARTINS’ tire inflation cages and inflation tools are the best and safest choices on the market.
Before using the product, please read the instructions carefully.
|Meets OSHA Standard 29 CFR 1910.177||Yes|
|Product dimensions - LxWxH (inches)||32 x 26 x 59|
|Product dimensions - LxWxH (cm)||81 x 66 x 150|
|Tire type||Truck & bus tires|
|Overall tire diameter - max. (inches)||47|
|Overall tire diameter - max. (cm)||119|
|Wheel width - max. (inches)||19|
|Tire width - max. (cm)||48|
|Net weight (kg)||82|
|Net weight (lb)||180|
|Hose length (inches)||300|
|Hose length (cm)||760|
|Autocalibration||Yes, on every unit start|
|Reading accuracy (psi)||0.29|
|Air compressor required||Yes|
|Finish||Powder coated paint UV resistant - Never loses is luster|
|Package dimensions - LxWxH (cm)||81 x 66 x 150|
|Package dimensions - LxWxH (inches)||32 x 26 x 59|
Do I need to anchor my inflation cage to the floor?
Safety standards vary by region. Verify with your local health and safety organization.
My safety sticker on my inflation cage is scratched or missing. Can I order a new one?
Yes, see our spare parts section.
Do I need an air compressor with my station?
Yes, the product does not produce compressed air.
What kind of air compressor should I use with this product?
The compressor should
have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
be equipped with an air filter to protect against water and oil contained in compressed air.
meet the minimum and maximum air inlet pressure of the inflator.
Can I use another type of chuck?
Yes, other chuck types can be used. However, the chuck type installed must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)