Automatic Tire Inflator - Flatematic High Pressure
20 in stock
- Secure payment
Features and benefits
- Inflate your high-pressure tires automatically up to 232 psi while keeping your hands free.
- Wall-mounted unit with 25’ air hose to easily reach all tires on the vehicle.
- Only 2 min. 20 sec. to inflate a 11R22.5 tire from 0 to 100 psi.
- Loud audible signal warns you that the tire has reached the desired pressure.
- 4 measurement units (psi, bar, kPa, kg/cm2), nitrogen purge cycles, LCD screen & backlight.
Designed for high-pressure tires the Flatematic High pressure automatic tire inflator can precisely inflate up to 232 psi. This one outlet automatic tire inflator once connected to the tire will automatically start inflation or deflation. Its clip-on chuck secures and makes tire inflation more productive by allowing you to work away from the tire.
The Flatematic High pressure is also nitrogen compatible and is equipped with a N2 purge cycle function which can perform up to 5 cycles. Each cycle will inflate with nitrogen up to the selected pressure then deflate to 5 psi then inflate again to the final selected pressure. For every purge cycle performed, the nitrogen purity in the tire increases.
*Air compressor required
Important: compressed air contains water and oil, use proper air filter between the source and device. Failure to do so will void the warranty.Specifications
| Specifications | |
|---|---|
| Included |
|
| Features | Fixed, Wall-mounted, High-Pressure, Over pressure setting (OPS), Nitrogen compatible (n2) |
| Materials | Aluminium |
| Color | Black and yellow |
| Air compressor required | Yes |
| Air pressure - max. outlet (psi) | 232 |
| Air pressure - max. inlet (psi) | 261 |
| Reading accuracy (psi) | 0.29 |
| Airflow - max. (l/min) | 2500 |
| Airflow - max. (CFM) | 92 |
| Hose quantity | 1 |
| Hose length (inches) | 300 |
| Hose length (cm) | 760 |
| Chuck type | Open |
| Certifications | CE |
| Calibration certified | Yes |
| Autocalibration | Yes, on every unit start |
| Maintenance & calibration service | Yes |
| Degree of protection | IP66 |
| Supply voltage | 110 |
| Temperature range | -10 °C ~ 50 °C / 14 °F ~ 122°F |
| Product dimensions - LxWxH (inches) | 9 x 10 1/2 x 3 1/2 |
| Product dimensions - LxWxH (cm) | 23 x 27 x 9 |
| Net weight (kg) | 6.3 |
| Net weight (lb) | 14 |
| Package dimensions - LxWxH (inches) | 12 x 12 x 9 |
| Package dimensions - LxWxH (cm) | 31 x 31 x 23 |
| Gross weight (kg) | 7.7 |
| Gross weight (lb) | 17 |
| Warranty | 1 year warranty |
Documents
FAQ
-
Can the inflator be installed outside?
No, the inflator is not intended for prolonged outdoor use. Its Ingress Protection (IP) rating is 66. Do I need an air compressor with my inflator?
Yes, the inflator does not produce compressed air.What kind of air compressor should I use with this product?
The compressor should have a stable air supply monitored by an air regulator (maintain a minimum air pressure fluctuation)
Be equipped with an air filter to protect against water and oil contained in compressed air.
Meet the minimum and maximum air inlet pressure of the inflator.Do I need to recalibrate my inflator?
No, the inflator has an automatic calibration feature. It recalibrates itself every time it starts.Can I use another type of chuck on my inflator?
Yes, other chuck types can be used. However, the chuck type installed on the inflator must be respected. In this case it is an open chuck. The chuck must also remain in place without someone holding. (clip on chuck, screw on chuck, etc.)What maintenance service do you offer?
MARTINS offers Maintenance and calibration service (MW-MC) in addition to its 1 year warranty. See details on our maintenance service: https://martinsindustries.com/ca_en/maintenance-calibration-of-flatematic-family
